Features:- With overflow
- Pattern plain
- This sculptured metal sinks are hand crafted, therefore all dimensions are estimates
- Faucet, drain assembly, p-trap, shut-off valve, and supply lines are sold separately.
- Installation Type: Undermount
- Corner Sink Installation Type:
- Dual Mount Installation Types:
- Sink Shape: Rectangular
- Specialty Shape:
- Finish:
- Primary Material: Metal
- Natural Variation Type: No Natural Variation
- What is an Overflow?: An overflow is a small hole in the back of the sink that prevents the sink from overflowing. When the sink is full of water, this hole allows air to circulate to the drain so the water can drain more quickly.
- Overflow Hole: Yes
- Faucet Included: No
- Handles Included: No
- Number of Faucet Holes: 0
- Craftsmanship Type: No Craftsmanship
- Drain Assembly Included: No
- Drain Type:
- What is a Shut-Off Valve?: A shut-off valve is connected to the water lines and allows you to turn off the water for just one plumbing fixture instead of your entire home.
- Shut-Off Valve Included: No
- What is a P-Trap?: A p-trap holds water to prevent sewer gases from entering the home through the drain. It also traps debris that has drained from the sink to prevent the plumbing system from being clogged.
- P-Trap Included: No
- What are Supply Lines?: Supply lines bring water and gas from the plumbing pipes behind your walls to your fixtures.
- Supply Lines Included: No
- Pedestal Included:
- Compatible Pedestal Part Number:
- Console Included:
- Shroud Included:
- Country of Origin: Mexico
- Style: Industrial
- Compatible Console Part Number:
- Compatible Drain Assembly Part Number: D1000; D3000
- Compatible Shroud Part Number:
- How to Install (String): To begin, take the entire countertop off of the vanity and turn it upside down onto a towel on the floor (this prevents countertop scratching). Next, rest the sink over the cutout on the counter and make sure the sink is centered with the drain hole and evenly spaced between bolt holes. Then, with a pencil, create an outline of the sink on the countertop and apply a 0.25" layer of silicone on the rim of the sink. Carefully place the sink upside down on the countertop and position it within the outline you drew. Lastly, attached the sink clips snugly and then carefully lift and place the counter and sink onto your vanity. Connect your faucet, drain, p-trap and supply lines.
Spefications:- ASME A112.18.2 Compliant:
- ASME A112.19.1/CSA B45.2 - 2018 Compliant:
- ADA Compliant:
- UL Listed:
- ASME A112.19.2/CSA B45.1 Compliant:
- ASME A112.19.3 Compliant:
- ISTA 3A or 6A Certified:
- ISTA 1A Certified:
- ASSE 1001 Certified:
- ASSE 1016 Certified:
- TÜV Rheinland Certified:
- NSF/ANSI 61 Certified:
- cUL Listed:
- ISO 14000 Certified:
- ISO 9000 Certified:
- CSA Certified:
- UL 1951 Listed:
- CSA B125.1 Certified:
- UPC Certified:
- NAHB Compliant:
- Vermont Act 193 Compliant:
- IAPMO Certified:
- NSF Certified:
- ASME A112.18.1 Compliant:
- Low Lead Compliant:
- Energy Star Compliant:
- CE Certified:
- cUPC Certified:
- Stiftung Warentest Note:
Dimensions:- The Overall Height of a sink is the external measurement from top to bottom, while the Overall Depth is the interior measure of how much water the sink can hold.
- The Overall Length of a sink is measured in inches from left to right and the Overall Width is measured from front to back.
- Remember that undermount sinks are typically set back 2"-2.5" from the front of the counter.
- Undermount sinks are mounted from below the countertop, so before beginning installation, check to make sure the countertop is 1/2"-1" thick.
- Basin Length - Side to Side: 16
- Basin Width - Front to Back: 11
- Basin Depth - Top to Bottom: 6.5
- Overall Length - Side to Side: 19
- Overall Width - Front to Back: 14.75
- Overall Product Weight: 9
- Pedestal Height - Top to Bottom:
- Drain Hole Diameter: 1.25
Assembly:- Installation Required: Yes
Warranty:- Product Warranty: Yes
- Warranty Length:
- Full or Limited Warranty:
- Warranty Details:
Sink Finish: Polished Brass
