- City collection
- Ceramic white finish
- Undermounted
- Comes with overflow
- Mounting hardware is included
- Recommended drain and trap
- Faucet, drain assembly, p-trap, shut-off valve, and supply lines are sold separately.
- Undermount sinks are mounted from below the countertop, so before beginning installation, check to make sure the countertop is 1/2"-1" thick.
- Massachusetts plumbing approved.
- The overall height of a sink is the external measurement from top to bottom, while the overall depth is the interior measure of how much water the sink can hold.
- The overall length of a sink is measured in inches from left to right and the overall width is measured from front to back.
- Remember that undermount sinks are typically set back 2"-2.5" from the front of the counter.
- Installation Type: Undermount
- Corner Sink Installation Type:
- Dual Mount Installation Types:
- How to Install: Before you begin installation, check to make sure that your wall has two studs in place where you'd like the sink mounted. If the two studs are not aligned with the mounting location, install a 2x4 or 2x6 wood block in the wall to support the sink. Then, drill mounting holes in the wall where the sink will be anchored. Next, attach the faucet and drain assembly to the sink and secure the sink to the wall with the mounting hardware. Lastly, connect the water supply lines and shut off valves.
- Sink Shape: Rectangular
- Specialty Shape:
- Finish: White
- Primary Material: Ceramic
- Natural Variation Type: No Natural Variation
- What is an Overflow?: An overflow is a small hole in the back of the sink that prevents the sink from overflowing. When the sink is full of water, this hole allows air to circulate to the drain so the water can drain more quickly.
- Overflow Hole: Yes
- Faucet Included: No
- Flow Rate (GPM):
- Compatible Faucet Type: Deck Mounted
- Handles Included: No
- Number of Faucet Holes: 0
- Craftsmanship Type: No Craftsmanship
- Drain Placement: Center
- Drain Assembly Included: No
- Drain Type:
- What is a Shut-Off Valve?: A shut-off valve is connected to the water lines and allows you to turn off the water for just one plumbing fixture instead of your entire home.
- Shut-Off Valve Included: No
- What is a P-Trap?: A p-trap holds water to prevent sewer gases from entering the home through the drain. It also traps debris that has drained from the sink to prevent the plumbing system from being clogged.
- P-Trap Included: No
- What are Supply Lines?: Supply lines bring water and gas from the plumbing pipes behind your walls to your fixtures.
- Supply Lines Included: No
- Pedestal Included:
- Compatible Pedestal Part Number:
- Console Included:
- Shroud Included:
- Country of Origin: Italy
- Country of Origin - Additional Details:
- Style: Modern & Contemporary
- Compatible Console Part Number:
- Compatible P-Trap Part Number: Linea 53922
- Compatible Shut-Off Valve Part Number:
- Compatible Drain Assembly Part Number: Linea 53991
- Compatible Supply Lines Part Number:
- Compatible Shroud Part Number:
- Compatible Mirror Part Number:
- How to Install (String): To begin, take the entire countertop off of the vanity and turn it upside down onto a towel on the floor (this prevents countertop scratching). Next, rest the sink over the cutout on the counter and make sure the sink is centered with the drain hole and evenly spaced between bolt holes. Then, with a pencil, create an outline of the sink on the countertop and apply a 0.25" layer of silicone on the rim of the sink. Carefully place the sink upside down on the countertop and position it within the outline you drew. Lastly, attached the sink clips snugly and then carefully lift and place the counter and sink onto your vanity. Connect your faucet, drain, p-trap and supply lines.
- Designers:
- Stiftung Warentest Note:
- Licensed Product Category:
- Sports League Name:
- Sports Team Name:
- Entertainment Studio:
- Movie / Show Series Name:
- Character Name:
- Corporate Brand:
- Fashion Brand:
- Imported: Yes
- Plug-In: No
- Adapter Type:
- Plug Type:
- Internal - Roomba'ed: Yes
- INTERNAL USE ONLY - Distressed Promo: Yes
- ASME A112.18.2 Compliant:
- ASME A112.19.1/CSA B45.2 - 2018 Compliant:
- ADA Compliant: Yes
- ASME A112.19.2/CSA B45.1 Compliant: Yes
- California Proposition 65 Warning Required: No
- UL Listed: Yes
- ASME A112.19.3 Compliant:
- ISTA 3A or 6A Certified: <
![[Hamburger] Embroidered Applique Pencil Pouch Bag / Pencil Holder / Carrying Case (3.5*2.5*2.5)](https://avmedia.ams3.cdn.digitaloceanspaces.com/6/e8/6e83b6e3-a853-4bca-a463-aa449950cf14.webp)
