- Faucet and drain assembly are sold separately.
- Installation Type: Undermount
- Corner Sink Installation Type:
- Dual Mount Installation Types:
- Sink Shape: Oval
- Specialty Shape:
- Finish (Sink Finish: White): White
- Finish (Sink Finish: Linen): Linen
- Primary Material: Vitreous China
- Natural Variation Type: No Natural Variation
- What is an Overflow?: An overflow is a small hole in the back of the sink that prevents the sink from overflowing. When the sink is full of water, this hole allows air to circulate to the drain so the water can drain more quickly.
- Overflow Hole: No
- Faucet Included: No
- Flow Rate (GPM):
- Handles Included: No
- Craftsmanship Type: No Craftsmanship
- Drain Assembly Included: No
- Drain Type:
- What is a Shut-Off Valve?: A shut-off valve is connected to the water lines and allows you to turn off the water for just one plumbing fixture instead of your entire home.
- What is a P-Trap?: A p-trap holds water to prevent sewer gases from entering the home through the drain. It also traps debris that has drained from the sink to prevent the plumbing system from being clogged.
- What are Supply Lines?: Supply lines bring water and gas from the plumbing pipes behind your walls to your fixtures.
- Pedestal Included:
- Compatible Pedestal Part Number:
- Console Included:
- Compatible Mounting Materials Part Number:
- Shroud Included:
- Country of Origin: China
- Style: Modern & Contemporary
- Compatible Console Part Number:
- Compatible Shroud Part Number:
- How to Install (String): To begin, take the entire countertop off of the vanity and turn it upside down onto a towel on the floor (this prevents countertop scratching). Next, rest the sink over the cutout on the counter and make sure the sink is centered with the drain hole and evenly spaced between bolt holes. Then, with a pencil, create an outline of the sink on the countertop and apply a 0.25" layer of silicone on the rim of the sink. Carefully place the sink upside down on the countertop and position it within the outline you drew. Lastly, attached the sink clips snugly and then carefully lift and place the counter and sink onto your vanity. Connect your faucet, drain, p-trap and supply lines.
- ASME A112.19.2/CSA B45.1 Compliant: Yes
- ISTA 3A or 6A Certified: No
- ISTA 1A Certified: No
- ISO 14000 Certified: No
- ISO 9000 Certified: No
- UPC Certified: Yes
- NAHB Compliant: No
- IAPMO Certified: Yes
- Low Lead Compliant: No
- CSA B45.5/IAPMO Z124 Compliant - Plastic Plumbing Fixtures:
- Interior sink measurements:16.1" W x 13" D x 6.7" H
- The Overall Height of a sink is the external measurement from top to bottom, while the Overall Depth is the interior measure of how much water the sink can hold.
- The Overall Length of a sink is measured in inches from left to right and the Overall Width is measured from front to back.
- Remember that undermount sinks are typically set back 2"-2.5" from the front of the counter.
- Undermount sinks are mounted from below the countertop, so before beginning installation, check to make sure the countertop is 1/2"-1" thick.
- Overall Length - Side to Side: 18
- Overall Width - Front to Back: 15
- Overall Height - Top to Bottom: 8
- Overall Product Weight: 17.6
- Pedestal Height - Top to Bottom:
- Pedestal Depth - Front to Back:
- Faucet Centers:
- Drain Hole Diameter: 1.8
- Installation Required: Yes
- Product Warranty: Yes
- Warranty Length: 1 Year
- Full or Limited Warranty:
- Warranty Details:
![Cotton Pencil Case [8Colors]/Pen Case Pouch Zipper Makeup Pouch, Bag School Supplies Office Dubudumo](https://avmedia.ams3.cdn.digitaloceanspaces.com/e/49/e4958416-f5b3-4e18-8fca-11a0694fc9a3.webp)
