Born and Ashfield All-in-One Metal Circular Undermount Bathroom Sink with Faucet
About our links
Some links on this site are affiliate links. If you buy something through them, we may earn a small commission from the shop, at no extra cost to you. Prices and stock come from the shops and can change.
The price comes from the shop and can change. Check price, size and delivery on the shop's page before you order.
Features:
Includes: 1 copper sink, 1 faucet, 1 grid drain and 1 care kit
Handmade from 18-gauge pure solid copper
Unfinished naked copper will naturally age and patina, like a penny
P-trap and shut-off valve are sold separately.
Installation Type: Dual Mount
Corner Sink Installation Type:
Dual Mount Installation Types: Drop-in;Undermount
Sink Shape: Circular
Specialty Shape:
Finish: Naked Copper
Primary Material: Metal
Natural Variation Type: No Natural Variation
What is an Overflow?: An overflow is a small hole in the back of the sink that prevents the sink from overflowing. When the sink is full of water, this hole allows air to circulate to the drain so the water can drain more quickly.
What is a Shut-Off Valve?: A shut-off valve is connected to the water lines and allows you to turn off the water for just one plumbing fixture instead of your entire home.
Shut-Off Valve Included: No
What is a P-Trap?: A p-trap holds water to prevent sewer gases from entering the home through the drain. It also traps debris that has drained from the sink to prevent the plumbing system from being clogged.
P-Trap Included: No
What are Supply Lines?: Supply lines bring water and gas from the plumbing pipes behind your walls to your fixtures.
Pedestal Included:
Compatible Pedestal Part Number:
Console Included:
Mounting Materials Included: No
Compatible Mounting Materials Part Number:
Shroud Included:
Supplier Intended and Approved Use: Residential Use;Non Residential Use
Country of Origin: Mexico
Style: Traditional
Compatible P-Trap Part Number:
Compatible Drain Assembly Part Number:
Compatible Supply Line Part Number:
Compatible Mirror Part Number:
How to Install (String): To begin, take the entire countertop off of the vanity and turn it upside down onto a towel on the floor (this prevents countertop scratching). Next, rest the sink over the cutout on the counter and make sure the sink is centered with the drain hole and evenly spaced between bolt holes. Then, with a pencil, create an outline of the sink on the countertop and apply a 0.25" layer of silicone on the rim of the sink. Carefully place the sink upside down on the countertop and position it within the outline you drew. Lastly, attached the sink clips snugly and then carefully lift and place the counter and sink onto your vanity. Connect your faucet, drain, p-trap and supply lines.
The Overall Height of a sink is the external measurement from top to bottom, while the Overall Depth is the interior measure of how much water the sink can hold.
The Overall Length of a sink is measured in inches from left to right and the Overall Width is measured from front to back.
Remember that undermount sinks are typically set back 2"-2.5" from the front of the counter.
